One calculation engine for Civil, Architecture and Interior work. Software calculates. The assumptions stay visible.
MASTER CALCULATORInterior Master
Materials · fabrication · finishes · lighting
EVERY FIELD · ONE ENGINE
The Interior master keeps the full calculation engine available, while surfacing tile layouts, partitions, cabinetry, worktops, edge banding, soft furnishings, ceilings and lighting planning first.
71 calculators stay available in every master mode
The Interior master keeps the full calculation engine available, while surfacing tile layouts, partitions, cabinetry, worktops, edge banding, soft furnishings, ceilings and lighting planning first. Supports mixed-unit arithmetic, compatible-unit result selection, construction fractions through 1/64 inch and dimension-aware calculations without switching calculators. Start blank, then type freely or insert any supported unit from the full catalog.
Every supported unit is available. Inserted units remain part of the expression, so result conversion, history, sharing and project save retain the exact unit context.
RESULT—Enter an expression.
SAVED PRESETS · 0/20
Saved in this browser for reuse on this device.
UNIT CONVERSION
Every supported unit.
Use any supported unit in the master expression. The result can be displayed in any compatible unit, while this panel handles direct unit-to-unit conversion.
3.2808399 ft
MEASUREMENT
Room & wall quantities
Openings + wastage
Gross15 m²
Openings2 m²
Net13 m²
With waste14.3 m²
Method & assumptions
FormulaNet = length × height − total opening area
MethodCalculate gross wall area, deduct each opening × quantity, then apply wastage to the net quantity.
MethodApply wastage to the quantity before multiplying by the entered unit rate.
AssumptionsQuantity 100; rate ₹50; waste 10%
DisplayValues are rounded for display only.
CORE MATH
Geometry, density & commercial calculations
Deterministic helpers on the same engine
Density
Density7,850 kg/m³
Method & assumptions
FormulaDensity = mass ÷ volume
MethodDivide the entered mass by the entered volume.
AssumptionsMass 7850 kg; volume 1 m³
DisplayValues are rounded for display only.
Percentage
Amount100
Plus1100
Minus900
Method & assumptions
FormulaAmount = value × percent ÷ 100; plus/minus apply ±percent to the base
MethodCalculate the percentage amount, then add or subtract it from the base value.
AssumptionsBase 1000; percentage 10%
DisplayValues are rounded for display only.
Discount + tax
Discount₹100
Tax₹162
Final₹1062
Method & assumptions
FormulaDiscounted = base − discount; tax = discounted × tax%; final = discounted + tax
MethodApply discount first, then calculate tax on the discounted price.
AssumptionsBase ₹1000; discount 10%; tax 18%
DisplayValues are rounded for display only.
Electrical load
Connected1 kW
Apparent1,000 VA
Current4.34782609 A
Daily8 kWh
30-day240 kWh
Method & assumptions
FormulaConnected kW = Σ(W × qty); VA = watts ÷ PF; 1Φ current = VA ÷ V
MethodSum connected wattage, adjust for power factor to apparent power, then calculate line current for the selected phase configuration and energy use.
AssumptionsPhase single ; voltage 230 V; PF 1; 8 h/day; billing basis 30 days
DisplayValues are rounded for display only.
Single-load model with one overall power factor. Three-phase current uses the balanced-load √3 relationship; this is not cable/protection sizing.
SHAPES · 2D · LIVE GEOMETRY
Two-dimensional shapes
Enter a dimension and the model derives the connected geometry where a defined profile makes that mathematically possible.
LIVE GEOMETRY
Square
One side controls the complete square.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Derived on the drawing: both other sides, face diagonal, inradius and circumradius.
Full calculation method
FormulaA=s²; P=4s; d=s√2
Auto-derivedBoth remaining sides equal the entered side; diagonals and radii follow exactly.
Accuracy / assumptionsOne independent length fully defines a square.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Rectangle
One side derives the other through the visible aspect ratio profile.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=LW; P=2(L+W); d=√(L²+W²)
Auto-derivedAuto mode derives W=L/(L:W). Manual mode treats L and W as independent.
Accuracy / assumptionsAspect ratio is an explicit profile, never an invisible guess.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Triangle
Auto profile uses a 3:4:5 right-triangle family until you switch to manual.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=bh/2; Heron A=√(s(s−a)(s−b)(s−c))
Auto-derivedAuto profile derives height and sides from the entered base and 3:4:5-family ratios.
Accuracy / assumptionsManual mode requires a geometrically compatible base, height and three sides.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Parallelogram
Base is the driver; side ratio and included angle define the assisted profile.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=bh; P=2(b+s); diagonals from b,s,θ
Auto-derivedAuto mode derives side and height from side/base and included angle.
Accuracy / assumptionsThe height, side and angle are cross-checked before diagonals are shown.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Trapezoid
Auto profile is symmetric: base ratio + height ratio determine the legs.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=(A+B)h/2; P=A+B+a+b
Auto-derivedAuto symmetric profile derives the second base, height and equal legs.
Accuracy / assumptionsBase/leg/height geometry is validated, not merely area-calculated.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Rhombus
One diagonal derives the other through the editable diagonal ratio.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=d₁d₂/2; P=4s; s=√((d₁/2)²+(d₂/2)²)
Auto-derivedAuto mode derives the second diagonal and side from the first diagonal.
Accuracy / assumptionsEntered side is checked against the diagonals.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Kite
Perpendicular-diagonal model with an editable diagonal ratio and split profile.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=d₁d₂/2; P=2(a+b)
Auto-derivedAuto mode models diagonal A as the symmetry diagonal and derives the split and sides.
Accuracy / assumptionsManual values are validated against the perpendicular-diagonal kite geometry.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Circle
Radius immediately resolves diameter, circumference and area.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=πr²; C=2πr; d=2r
Auto-derivedDiameter, area and circumference follow from the radius.
Accuracy / assumptionsπ is evaluated numerically at full JavaScript precision; display rounding is separate.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Ellipse
Semi-major axis derives the semi-minor axis from the visible axis ratio.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=πab; circumference ≈ Ramanujan II
Auto-derivedAuto mode derives b from the editable a:b axis ratio; focal geometry follows from a,b.
Accuracy / assumptionsCircumference is explicitly approximate because a general ellipse has no elementary exact perimeter formula.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Semicircle
Radius resolves diameter, curved edge and complete perimeter.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=πr²/2; curved=πr; total P=πr+2r
Auto-derivedDiameter equals 2r and total perimeter includes the straight diameter.
Accuracy / assumptionsCurved and total boundaries are reported separately.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Circular sector
Radius is the driver; the central angle remains editable.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=r²θ/2; arc=rθ
Auto-derivedAngle in degrees is converted to radians before calculation; perimeter includes two radii.
Accuracy / assumptionsAngle must be greater than 0° and no more than 360°.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Annulus / ring
Outer radius drives the inner radius using the editable wall ratio.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaA=π(R²−r²)
Auto-derivedRadial thickness, inner circumference and outer circumference follow from R and r.
Accuracy / assumptionsInner radius must remain smaller than outer radius.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Regular polygon
Choose side count, then one side resolves the entire regular polygon.
TAP A SIDE / DIAGONAL OR SELECT TWO CORNERS
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaP=ns; apothem=s/(2tan(π/n)); A=Pa/2
Auto-derivedCircumradius and interior angle are derived for the regular polygon.
Accuracy / assumptionsSide count is an integer n≥3.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
SHAPES · 3D · INTERACTIVE
Three-dimensional solids
Drag any model to rotate it. Dimensions remain linked to the calculation below the shape.
LIVE GEOMETRY
Cube
All edges stay equal, so one side controls every measurement.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=s³; SA=6s²; d=s√3
Auto-derivedAll 12 edges are equal; face diagonal is s√2.
Accuracy / assumptionsOne independent edge defines the complete cube.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Cuboid / rectangular prism
Auto profile links width and height to the entered length. Manual mode allows every edge to be entered independently.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=LWH; SA=2(LW+WH+HL); d=√(L²+W²+H²)
Auto-derivedAuto mode links W and H to L through explicit ratios; manual mode accepts all three.
Accuracy / assumptionsNo hidden dimensional assumptions are used in manual mode.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Cylinder
Radius and height are linked by a visible H/R profile when auto mode is ON.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=πr²h; lateral=2πrh; total=2πr(h+r)
Auto-derivedDiameter and both base areas follow from r; H/R controls assisted mode.
Accuracy / assumptionsHeight and radius are independent in manual mode.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Cone
Radius drives height through the visible H/R profile; slant height is then derived exactly.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=πr²h/3; lateral=πrℓ; total=πr(r+ℓ)
Auto-derivedSlant height ℓ=√(r²+h²).
Accuracy / assumptionsThe displayed surface areas include the circular base for total surface.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Sphere
The silhouette never has a preferred side, so the viewer uses live gradient shading to make rotation perceptible.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=4πr³/3; SA=4πr²; d=2r
Auto-derivedDiameter and great-circle area follow from r; shading provides orientation cues.
Accuracy / assumptionsA sphere has no unique side length, so radius/diameter are the meaningful independent dimensions.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Hemisphere
Curved surface and circular base are both included in the live totals.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=2πr³/3; curved=2πr²; total=3πr²
Auto-derivedDiameter and circular base area follow from r.
Accuracy / assumptionsTotal surface includes the flat circular base.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Triangular prism
The assisted profile keeps a 3:4:5 triangle and links prism length to the triangle base.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=A△L; SA=2A△+pL
Auto-derivedAuto mode keeps an explicit triangle profile and derives prism length from the base ratio.
Accuracy / assumptionsTriangle sides are cross-checked using Heron's formula.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Rectangular pyramid
Centered apex profile links base width and height to the entered base length.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Auto-derivedAuto mode links base width and height to base length.
Accuracy / assumptionsThe model is a right rectangular pyramid with a centered apex.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Conical frustum
Bottom radius drives top radius and height through explicit ratios; geometry rejects impossible radius order.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=πh(R²+Rr+r²)/3; lateral=π(R+r)ℓ
Auto-derivedSlant height ℓ=√((R−r)²+h²).
Accuracy / assumptionsBottom radius is greater than top radius.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
LIVE GEOMETRY
Torus / ring solid
Major radius drives the tube radius through a visible minor-radius ratio.
DRAG OBJECT · TAP DIMENSIONS · TAP CORNERS
True 3D mesh · touch an edge to select its dimension · drag to rotate
LIVE MODELEnter one or more compatible dimensions to calculate.
Full calculation method
FormulaV=2π²Rr²; SA=4π²Rr
Auto-derivedOuter/inner diameters and tube diameter follow from R and r.
Accuracy / assumptionsStandard ring torus with minor radius smaller than major radius.
DisplayDisplayed values are rounded only for readability. Underlying arithmetic is deterministic.
SITE & MATERIALS
Masonry, excavation, sheets & reinforcement
Quantity estimation only · verify drawings and site conditions
Masonry units
Wall1.2 m³
Units600
Recommended630
Mortar0.2766 m³
Method & assumptions
FormulaWall volume = net area × thickness; unit count = net area ÷ nominal face area
MethodDeduct opening area, derive wall volume, use joint-aware nominal face area for unit count, then estimate mortar as wall volume minus installed unit volume.
AssumptionsJoint 0.01 m; wastage 5%; opening area 0 m²
MethodExpand plan dimensions by the working-space allowance, calculate excavated volume, then apply swell. Backfill subtracts structure volume and converts compacted backfill to the equivalent loose volume using the entered compaction loss.
AssumptionsWorking space 0.25 m/side; swell 10%; compaction loss 5%
MethodCalculate sheet area from dimensions, divide the required coverage, then round procurement upward after wastage. This is area-based; actual cut nesting can require more sheets.
AssumptionsRequired area 20 m²; sheet 2.44 × 1.22 m; waste 10%
DisplayValues are rounded for display only.
Linear finish
Net100 m
With waste105 m
Method & assumptions
FormulaQuantity with waste = net length × (1 + waste%)
MethodApply the entered wastage percentage to the linear finish length.
MethodCheck the piece in both orientations, calculate how many full pieces fit across the sheet, then compare packing-based procurement with area-based material demand.
AssumptionsPiece quantity: 24; wastage: 5%
DisplayValues are rounded for display only.
Single-size nesting estimate with rotation check. Kerf, grain direction and mixed-size optimization are intentionally outside this basic helper.
Multi-piece cut-list nesting
4 piece types · quantities are expanded for placement planning.
MethodSort mixed-size rectangular pieces by size, try both orientations, pack into shelves, then compare actual sheet count with area-based procurement after wastage.
AssumptionsSheet 2.44 × 1.22 m; kerf 0.003 m; wastage 5%; heuristic is not guaranteed optimal
DisplayValues are rounded for display only.
Planning heuristic only. Kerf is modelled as a spacing increment; grain direction, edge banding and true CNC/guillotine optimization are not modelled.
Sheet 110 pieces
Plywood / laminate sheet quantity
Sheet area2.9768 m²
Area-equivalent sheets7.390486428379468
Recommended sheets8
Method & assumptions
FormulaSheets = required area × (1 + waste%) ÷ sheet area
MethodCalculate individual sheet area, apply wastage to required coverage, then round procurement upward.
AssumptionsRequired area 20 m²; sheet 2.44 × 1.22 m; waste 10%
Every Calculate click fetches the current allowlisted official sources with cache disabled. An official FSI value is used only when one unique, current profile matches this plot’s authority, zone, use, registered area, road widths and height context. No universal FSI default is assumed.
For automatic legal-rule mode, keep exempt area at 0 unless a verified exemption-rule profile exists. A positive exempt-area input is only available in explicitly labelled manual concept mode until the applicable exemption rule is verified.
For signed-in users, AI reads freshly fetched official PDFs for source extraction; no layout is generated and no V Coins are used.
Ground coverage
Actual40 %
Permissible footprint200 m²
Balance / excess0 m²
Excess footprint0 m²
Open ground300 m²
StatusCOMPLIANT
PRELIMINARY: Coverage rules depend on the applicable development regulation and what the authority counts toward the footprint.
Method & assumptions
FormulaCoverage = footprint ÷ plot area × 100
MethodCompares actual ground footprint against the user-supplied percentage limit.
AssumptionsAllowed coverage 40%; actual footprint 200 m²; balance is permitted footprint minus actual footprint.
DisplayPlanning values are rounded for display only.
Setbacks / buildable envelope
Buildable length17.5 m
Buildable width14 m
Envelope245 m²
Setback area255 m²
PRELIMINARY: Rectangular-plot helper only. Corner plots, road widening and irregular boundaries need separate review.
Method & assumptions
FormulaBuildable length = plot length − front − rear; width = plot width − left − right
MethodSubtracts the four supplied margins from a rectangular plot.
AssumptionsRectangular plot; all setbacks use the supplied reference boundaries.
DisplayPlanning values are rounded for display only.
Floor capacity
FSI-driven floors4.5
Height-driven floors5
Limiting equivalent4.5
Full floors4
Remaining FSI area100 m²
Partial-floor capacity100 m²
Partial equivalent0.5
PRELIMINARY: Does not account for every development-control, fire, parking or structural restriction.
MethodAdds slab soffit, beam sides/soffit and four-face column area.
AssumptionsSlab input is net soffit area excluding beam/column footprints; beam depth is exposed depth below the slab; slab edges/openings and special projections are excluded; preliminary quantity only.
DisplayValues are rounded for display only.
CIVIL / BUILDER TOOLKIT
Footing + foundation quantity
RCC7.2 m³
PCC1.936 m³
Excavation40.56 m³
Backfill31.424 m³
Method & assumptions
FormulaExcavation = (footing L + 2W) × (footing W + 2W) × depth × qty
MethodCombines footing concrete, PCC and a working-space excavation estimate.
AssumptionsUniform rectangular footings; no steps, slopes, column pedestals or reinforcement design.
DisplayValues are rounded for display only.
CIVIL / BUILDER TOOLKIT
Cut / fill earthwork balance
Compacted fill80 m³
Loose fill needed88.889 m³
Surplus cut11.111 m³
Import fill0 m³
StatusSURPLUS CUT
Method & assumptions
FormulaLoose fill = compacted fill ÷ (1 − compaction loss)
MethodConverts the target compacted fill volume into the equivalent loose volume needed before compaction.
AssumptionsBulk volumes only; the entered compaction loss is treated as a measured/project allowance. Soil classification, haul distance and swell/shrink testing are not modeled.
DisplayValues are rounded for display only.
CIVIL / BUILDER TOOLKIT
Water tank capacity
Capacity3 m³
Litres3,000 L
Method & assumptions
FormulaV = L × W × H
MethodCalculates geometric tank volume and converts cubic metres to litres.
AssumptionsUsable capacity is lower if freeboard, partitions, fittings or unusable volume are present.
DisplayValues are rounded for display only.
CIVIL / BUILDER TOOLKIT
Rainwater harvesting potential
Theoretical runoff64 m³
Annual capture57.6 m³
Annual litres57,600 L
Avg / month4.8 m³
Method & assumptions
FormulaCapture = area × rainfall(m) × runoff coefficient × efficiency
MethodConverts annual rainfall depth into a gross and recoverable catchment volume.
AssumptionsRainfall distribution is not modeled; storage overflow and first-flush losses need separate design.
DisplayValues are rounded for display only.
CIVIL / BUILDER TOOLKIT
Area-based cost estimate
Base cost40,00,000 ₹
Contingency2,00,000 ₹
Escalation1,20,000 ₹
Budget43,20,000 ₹
Budget / ft²2,006.71 ₹
Method & assumptions
FormulaBudget = area × rate + contingency + escalation
MethodUses the entered project rate rather than pretending there is one universal market rate.
AssumptionsRate must be sourced for the project/location; contingency and escalation are each calculated from the base cost independently; this is not a CPWD or Rajkot market-rate lookup.
DisplayValues are rounded for display only.
CIVIL / BUILDER TOOLKIT
Water demand + storage
Base daily6,750 L
Design daily7,425 L
Storage litres7,425 L
Storage volume7.425 m³
Method & assumptions
FormulaDaily demand = population × LPCD × (1 + allowance)
MethodApplies a user-supplied water-demand rate and storage duration.
AssumptionsUse the applicable occupancy, plumbing, local water-supply and project standard.
DisplayValues are rounded for display only.
CIVIL / BUILDER TOOLKIT
Labour productivity + duration
Effective productivity9
Worker-days11.111
Calendar days2.778
Plan whole days3
Method & assumptions
FormulaDays = quantity ÷ effective productivity ÷ team size
MethodSeparates labour effort from team-based calendar duration.
AssumptionsProductivity is project/site specific; supervision, holidays, parallel trades and material delays are not modeled.
DisplayValues are rounded for display only.
ARCHITECT MASTER
Programming, planning + spatial feasibility.
8 field-focused tools
ARCHITECT TOOLKIT
Space program / area allocation
Public300 m²
Private400 m²
Service150 m²
Circulation100 m²
Unallocated50 m²
Allocated95 %
Method & assumptions
FormulaZone area = total program area × allocation %
MethodTurns a program-area budget into explicit room/zone area targets.
AssumptionsFive editable rows are provided; add more rows in the full design schedule when needed.
DisplayValues are rounded for display only.
ARCHITECT TOOLKIT
Opening / window ratios
Window / wall20 %
Opening / floor10 %
Operable / floor5 %
Operable / glazing50 %
Method & assumptions
FormulaRatio = opening area ÷ reference area × 100
MethodProvides envelope design ratios for early daylight/ventilation thinking.
AssumptionsConceptual metric only. NBC or local ventilation/daylight requirements are not automatically certified.
DisplayValues are rounded for display only.
ARCHITECT TOOLKIT
Parking layout capacity
Bay area12.5 m²
Net bay area390 m²
Capacity31
Residual2.5 m²
Gross / space19.355 m²
Method & assumptions
FormulaNet parking area = zone × (1 − circulation%)
MethodConverts a gross parking zone into an indicative number of rectangular bays.
AssumptionsBay dimensions and circulation are planning assumptions; drive aisles, ramps, columns and turning paths need layout verification.
DisplayValues are rounded for display only.
ARCHITECT TOOLKIT
Structural / planning bay layout
Bays4
Grid lines5
Uniform spacing5 m
Target surplus0 m
Target shortfall0 m
Method & assumptions
FormulaBays = floor(available length ÷ target spacing), subject to minimum; uniform spacing = available length ÷ adopted bays
MethodQuick grid-spacing study for repeated structural or planning bays.
AssumptionsThis is not structural analysis; final grid depends on structural system, spans, columns and services. Target surplus means unused length at the target spacing; target shortfall means the adopted bay count requires tighter-than-target uniform spacing.
DisplayValues are rounded for display only.
ARCHITECT TOOLKIT
Core + usable area efficiency
Usable75 %
Core/service15 %
Residual100 m²
Residual %10 %
Method & assumptions
FormulaResidual = gross − usable − core/service
MethodMakes the non-usable portion visible before detailed circulation and service planning.
AssumptionsDefinitions of usable/carpet/core area are project-specific.
DisplayValues are rounded for display only.
ARCHITECT TOOLKIT
FSI / FAR scenario comparison
Scheme AFSI 1.4 · balance 200 m²
Scheme BFSI 1.7 · balance 50 m²
Scheme CFSI 1.8 · balance 0 m²
Method & assumptions
FormulaEach scenario uses the same permissible FSI budget
MethodCompares several massing/area proposals without changing the base plot rule.
AssumptionsLocal FSI definitions/exemptions remain user supplied; no approval rule is hardcoded.
DisplayValues are rounded for display only.
ARCHITECT TOOLKIT
Room aspect / dimension planner
Length6 m
Width4 m
Area24 m²
Perimeter20 m
Method & assumptions
FormulaWidth = √(area ÷ ratio); length = width × ratio
MethodBack-solves practical rectangular dimensions from an area target.
AssumptionsRectangular room only; doors, furniture, structure and circulation constraints require a separate check.
DisplayValues are rounded for display only.
ARCHITECT TOOLKIT
Facade glazing ratio
Glazing / facade30 %
Opaque facade70 m²
Openable / glazing50 %
Method & assumptions
FormulaGlazing ratio = glazed area ÷ facade area × 100
MethodMakes facade transparency and operability proportions explicit.
AssumptionsEnergy, heat gain, glare, safety and local daylight requirements are not automatically evaluated.
DisplayValues are rounded for display only.
INTERIOR MASTER
Materials, fabrication + finish planning.
8 field-focused tools
RECOMMENDED FOR CURRENT MASTER
Tile layout + edge cuts
Best orientationoriginal
Tiles along length4
Tiles along width6
Full tiles24
Edge remainder L0.191 m
Edge remainder W0.385 m
Method & assumptions
FormulaFull-tile run = n × tile size + (n − 1) × joint; compare original/rotated orientation
MethodIncludes grout-joint width when determining how many full tiles fit in each direction, then reports the remaining edge-cut bands.
AssumptionsRectangular room and regular straight grid; perimeter gaps, movement joints, borders, staggered layouts and irregular room geometry need separate treatment.
DisplayValues are rounded for display only.
RECOMMENDED FOR CURRENT MASTER
Gypsum partition quantity
Net area10.8 m²
Face area21.6 m²
Boards8
Studs8
Stud length21.6 m
Track8 m
Method & assumptions
FormulaBoards = net partition face area × (1 + waste) ÷ board area
MethodEstimates board procurement plus a basic stud/track linear quantity.
AssumptionsOpenings and framing around openings are not fully detailed; profile sizes and structural bracing are excluded.
MethodProvides an area-level board schedule for rectangular cabinet fabrication.
AssumptionsThickness, grain, joints, hardware, true cutting optimization and back-panel material changes are not modeled.
DisplayValues are rounded for display only.
RECOMMENDED FOR CURRENT MASTER
False ceiling + cove planning
Room area20 m²
Inner panel area14.96 m²
Border area5.04 m²
Panels23
Outer path18 m
Inner path15.6 m
Method & assumptions
FormulaInner area = (L − 2border) × (W − 2border); path length depends on selected cove/drop edge
MethodSeparates a central panel zone from a perimeter border and reports both outer and inner rectangular path lengths.
AssumptionsRectangular room and constant border width; outer path follows the room perimeter, inner path follows the inner edge of the border; levels, drops, framing and lighting cut-outs require detailed design.
DisplayValues are rounded for display only.
VKAI RULE
Software calculates. You verify.
These results are deterministic calculations, not structural certification or code approval. Assumptions and source inputs must remain visible before using a result on site.